"The Windows Replacement Awards: The Most Sexiest, Worst, And Strangest Things We've Ever Seen > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

When it's Time for Window Replacement

It's time to replace your windows if they're no longer able to protect your home from the elements, filter noise, or improve its design. But where do you start?

There are a myriad of factors to take into consideration. Let's break it down to help you make your choice: style, energy use and installation, labeling and price.

Energy Efficiency

Energy savings is among the main reasons why homeowners choose to replace their windows. The replacement of old, drafty windows with new ones can lower the cost of cooling and heating by up to 20%. Some people are dissatisfied when they find that their savings in energy do not pay for the initial cost of new windows for a prolonged period of time.

Window performance and operation should be a major consideration for any homeowner considering replacing their windows. If a window isn't working properly can increase your home maintenance expenses, utility bills and increase the possibility of air leaks. If your windows are not moving up and down or sliding side-to-side like they should be, you may need to replace them because the frames are warped or swollen due to excessive moisture or a lack of sealing.

Mildew or mold on the inside and outside of the frame is a further indication that it's time to replace your windows. This is typically a sign of a failed seal or damaged weather stripping. Mold and mildew that results from these issues may create health and safety issues for your family if they are not addressed promptly.

New replacement windows can also improve home security, curb appeal and resale value. These benefits are enhanced when the windows used for a renovation are energy-efficient according to the National Fenestration Rating Council.

The U-factor is used to measure the efficiency of windows in terms of energy consumption. The lower the U factor, the higher the insulating power of the window. A U-factor less than 0.26 is a good rule of thumb. The frame design and material are crucial factors to take into consideration for energy efficiency. Vinyl is durable and low-maintenance however, it is prone to expand and contract when the temperature changes. This can cause leaks. Wood is timeless and provides superior insulation however, it requires regular maintenance. Aluminum is lightweight and easy to maintain and it conducts heat efficiently.

To get the best performance from their new windows, homeowners should hire a professional contractor to install the windows. A professional can also help you choose the right windows for your home's style and climate zone, and can provide you with information regarding resales value and homeowner satisfaction.

Style

New windows will always add value to a home. It can be a bit overwhelming to think about all the various types, styles and configurations that are available. The choice isn't only about design or function- choosing the wrong windows can detract from a home's resale value.

Window contractors use different ways to replace old frames with energy-efficient ones dependent on their condition. One is a pocket replacement, in which a contractor removes the exterior frame but leaves the interior trim and sashes. Sash pack replacement windows and doors is another method that's often suggested for older homes or areas with historic architecture where grills are required. These are standardized kits that come with aluminum jamb liners made of wood or clad and replacement sash for the upper and lower half of the window.

A third method is to put in windows with a full frame, which require removing the entire existing frame and sash. This is recommended if the windows that are in use are damaged beyond repair. Full frame installations are also recommended for homeowners who wish to change the type of window, for instance by replacing double-hungs by sliding or cases.

When you are buying replacement windows cost windows, make sure you choose windows with the NFRC label, which indicates the window's energy-efficiency rating. The higher the rating is, the more efficient the window.

Before installing your new window, loosen and take off the stops that secure the window. Carefully work around the sill of the current frame to ensure you don't scratch the wood. If needed, shim it. After the window has been put in then shim the top and bottom edge to ensure a secure fit. Add caulk to the outside edge of the window to seal it.

Fill any gaps that are greater than 0.64 cm (0.24 in) with a backing rod made of foam-rubber. This is a far superior option to caulk that can trap moisture, causing wood rot and mold. If you have any gaps wider than this, screw 1 in (2.5 cm) furring strips to the sides of the existing frame to raise the height.

Budget

The initial cost of replacing windows is high but it's worth it for the energy savings it provides and the improved comfort it provides to your home. It also enhances the value of your home and could help reduce utility bills. Before you start your project, it's important to establish a budget to guide your spending decisions. Think about your family's needs for energy as well as the type of windows you'd like to install. A reputable contractor for windows can provide insights into your expenses that are not related to your personal goals and make suggestions to minimize them.

Window frame materials are among the major factors that determine replacement windows cost. Aluminum and vinyl are the least expensive options, while wood, fiberglass and composite frames are more costly. Be aware of the advantages and disadvantages of each frame material to help you select the best one for your home. Wood windows, for example are more durable, offer superior insulation but require regular maintenance and are prone to moisture damage. Vinyl and aluminum windows are more affordable, however, they are susceptible to rust and don't provide the same amount of insulation as wood windows.

The window replacement company you choose to work with can provide a variety installation methods that impact your overall cost. The most labor-intensive option is a complete frame glass replacement window, in which the entire window is removed and replaced with a new unit. This approach is typically advised when frames are damaged or rotted. It's also recommended in the case of historical renovation projects. A less costly alternative is to use insert window replacement. In the process, the existing sash, operating hardware and exterior trim are removed. However the exterior trim and siding remain in place. A new window unit is then placed into the opening and anchored to the wall, then insulated and sealed.

If you are doing the work yourself, make sure you factor in the cost for the tools. A tape measure, a shim that is waterproof and caulk guns are crucial. Make sure you buy shims in different thicknesses to accommodate the different sizes of your window sills as well as head jambs. You'll need elastomeric sealant fill in any gaps around the casing and frame.

Installation

Windows are available in a variety of sizes and shapes to suit the unique style of each house. There are options for single-hung, double-hung sliding bay, bow, casement, circle, garden, awning, egress and jalousie windows. They are also available in various materials and finishes. Some are insulated to promote energy efficiency.

Replace your old, inefficient windows with energy-efficient double-hung window to save money. The process is easy, but it's worth the effort. You'll also reap the benefits of having a beautiful, new window.

Take off the screen and sash before installing your new window. This makes it easier to move the frame around and will protect the material. After the window is moved into place, you'll need to apply caulk along the frame's edges and in the gap, where there is any, using the caulk recommended for windows and doors.

Based on your preference and the condition of your existing frame, you may choose to use plastic or cedar shims to make sure that the window is properly positioned in the opening. Be careful not to over-shim the window as this could cause water condensation within the frame to accumulate and deteriorate materials.

After the window has been installed the installer will make sure the frame is level, well caulked and plumb. Install any trim that was removed from the interior to allow for the window. Then, you can paint or stain the window to the color scheme of your home. Be sure to seal and insulate the sill, jambs and flange on the exterior of your house to further improve the performance of your window.