See What Ghost Immobiliser Problems Tricks The Celebs Are Using > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. It is discreet and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be altered up to 20 times. This then authorizes the startup of your vehicle.

Simple change of PIN code

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are many kinds of aftermarket security devices including tracking systems, alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking system may assist you in locating your vehicle in the case of theft, it will not stop the crime from happening in the first in the first place. Immobilisers, in contrast perform exactly as they say on the tin - they shut off your car's engine to prevent it from being started. The Autowatch Ghost 2 immobiliser immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to steal your vehicle.

The ghost immobiliser problems device uses the buttons on your car to create a unique sequence that must be entered in order for the engine to start. This can be accomplished by using the window, heater or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their car without the button sequence. This is an excellent option if you want to give your car to valet parking or maintenance. The immobiliser will stay in operation.

The Ghost is an innovative and unique device that operates with your vehicle's buttons rather than as a separate unit. This means that it's not just a powerful protection against theft of your vehicle, but also a transferable device onto any other vehicles you own, making it much more investment-wise than traditional steering wheel locks.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security system that protects your vehicle from key cloning, hacking & ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly over the CAN bus to disable the motor. It can be plugged into the vehicle without the need for extra wiring and has been extensively tested to make sure it works with all vehicles. It is also indestructible to jamming devices that are the most common method used by thieves to bypass the immobilisers in place.

The benefit of using CAN data is that it runs silently in comparison to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technologies and is likewise unreadable by conventional diagnostic tools. The Autowatch ghost immobiliser Problems doesn't emit LED indications and uses the buttons in your vehicle, such as the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. This sequence can be extended 20 presses to provide additional security. The iPhone app only allows one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The ghost vehicle immobiliser also stops car thieves from using an additional key or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run only if a valid PIN has been entered. It can be temporarily operated in valet or service mode (with parameters set, such as 30mph speed limit) which means you can give your car to a valet or service without needing to enter an entry code.

Each vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device snoops on electronic signals that block the system of your vehicle from running its normal initialization process until you enter a custom passcode. The system can be activated or deactivated through your smartphone's app without the need for additional wires.

The standard factory immobilisers work with a transponder which is built into the key. This transmits a signal to the ECU. If the correct code is transmitted the car will begin however, if the transponder is replaced by one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle to be started and stolen. The ghost immobiliser near me immobiliser has been developed by a South African company at the top of the line in vehicle security technology. It protects your car from key cloning, hacking and even key theft. Only by physically towing your vehicle away could a thief get it, and they would still not be able drive it.

Ghost utilizes the buttons of your car, such as the indicator stalk along with the steering wheel, indicator stalk and door panels to create an unique PIN code that is changeable that needs to be entered before you can use your car. This is not required to use additional hardware, such as keys-fobs, and can be up to 20 presses long. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals, so thieves are not able to make use of sophisticated RF scanning or code-grabbing technology to determine if the security system has been installed.

Ghost is more difficult to get rid of than car alarms that require disarming by pressing several buttons. This makes it a great supplement to a GPS tracker that can assist in locating your vehicle after it has been stolen.

Emergency PIN code override

You do not have to look too far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves using the most advanced technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow them to start the car without your original keys.

Our Ghost immobiliser fights this and provides you with an additional layer of security to prevent your vehicle from being taken when it is targeted by thieves. It generates an individual pin code by pushing the buttons on your steering wheel, door panel and centre console. The unique pin code must be entered along with your original key fob to stop the vehicle from getting started. The unique override PIN can be found on the black card that you will receive following your installation and is easy to remember because there are no LED indications.

The device is hidden inside the vehicle's wiring and doesn't emit any radio signals, so it can't be identified by modern criminals using diagnostic software that is able to recognise what type of security system you have installed. This makes it a fantastic alternative to the tracker.

Contrary to most security systems, which have an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to disable the vehicle completely through a digital block of commands to both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems but this must be specified before installing the device. They are also service/valet-mode compatible and a great alternative to a tracker you have your car checked for an electrical fault at the dealers.

Service/Valet mode

In recent years there has been a rise in the number of vehicles being stolen without the owners keys. It's easier than ever before to take your joy and pride thanks to the availability of key cloning tools and door lock picks. To stop this, we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been copied or your car has been stolen.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data loop. It is completely silent, since it doesn't use radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also shields against the possibility of adding the key to a new one or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.

The device is hidden inside your car, using buttons on the steering wheel, centre console & door panels. Before you can begin your car, you must enter a unique, changeable PIN code up to 20 digits.

This is the first aftermarket CAN-bus immobiliser that was developed. It will stop your vehicle from being driven or even started in the event that you do not enter a PIN code before entering. If the device is in armed and you attempt to drive off it will display a warning on your dash, which will flash on a regular basis for approximately 300m. If you type in your PIN code at this point, it will disable the anti-hijack and your car will continue to operate as normal. If you don't enter your PIN code at this point, the warning will continue to flash and will require a new PIN code for every attempt to start your vehicle.